COMPLETE GUIDE> PC Internet Access For Ur Mobile

[Spiral]

HOW TO ACCESS INTERNET ON YOUR MOBILE USING PC's INTERNET CONNECTION




METHOD 1 -BEST
What do you need?
- a PC with internet connection (I use LAN)
- a Bluetooth dongle
- Your Mobile Device (I am using N-GAGE QD, Should work on all symbianS60)
- Working mRouter Bluetooth Connection
- NetFront Browser

Connect the PC to the internet.
Connect your phone to the PC using mRouter.
Now turn on NetFront. Just click on your links. Netfront automatically detects the internet connection and gets the web to your phone



METHOD 2

What do you need?
- a PC with internet connection (I use LAN)
- a Bluetooth dongle
- Your Mobile Device (I am using N-GAGE QD, Should work on all symbianS60)
- Working mRouter Bluetooth Connection

In the device you should create a new accesspoint. For this, go to
setup\ settings \ connection\ access points. Then choose
options \new access point \ use default settings. Then you should
copy the following settings. You shouldn't need to have to change
much.

Connection name: ..:: Free Radical ::.. (or any other arbitrary name):lol:
Data bearer: GPRS
Access point name: Your Computer Name ( Check in Paired Devices)
User name: None
Prompt password: No
Password: (nothing)
Authentication: Secure
Gateway IP address: 0.0.0.0

Connect ur PC to the internet. Connect ur mobile to the PC using mRouter.

METHOD 3 ADVANCED SERIAL/CABLE CONNECTION

GET MORE INFO HERE
[Only Registered users can see links . Click Here To Register...]

What do you need?
- a PC with internet connection
- Your Mobile Device (Not Tested)
- Working mRouter Bluetooth Connection
- gnubox.SIS

1. Deactivate all the Checkboxes in mRouter (at least the ones of the Bluetooth COM ports)
2. Goto Bluetooth settings and Deactivate everything else in Local services than Bluetooth serial port, note the com port you set as bluetooth serial port
3. Goto Phone and Modem options, go to "Modems" add a new one, activate "I will select it from a list"
4. choose "Communications cable between 2 Computers" from the list (in Standard Modem Types)
5. Select the COM port from step3
6. in the modem settings set maximum port speed to 115200
7. goto Network Connections and create a new connection (wizard)
8. Select “Set up an advanced connection”
9. “Accept incoming connections”
10. Check the “Communications cable between two computers”
11. Do not allow VPN connections
12. select a username you want to give access to your pc over Bluetooth (that’s the username you will set on the phone later)
13. in the settings of that connection go to Network select TCP/IP. Goto Settings
14. set the IP range to something like 10.0.2.2-10.0.2.254 or, what you like
15. Remove Internet Connection Sharing from all interfaces
16. run cmd.exe and enter the following commands:

netsh routing ip nat install
netsh routing ip nat add interface "YOUR LAN INTERFACE NAME" full
netsh routing ip nat add interface Internal private

“YOUR LAN INTERFACE NAME” has to be replaced with the name of the interface connected to the internet
the “Internal” of the last line depends on the language of your windows!!
17. if there is a "Bluetooth Network" connection in Network Connections delete it.

your pc should now be set correctly

On your mobile
1. Download gnubox.SIS, attached to this post (or download here) and install it on your phone
2. Create a new Access Point on the phone (Setting|Connection|Access points|New access point|Use default settings).
3. Use the following settings for it:

a. Name: Bt. The name is important, the software will look for it.
b. Data Bearer: GSM data
c. Dial-up number: e.g. 2222. It doesn't matter what you have here as long as it's not empty
d. Username: the username you gave access to the incoming connection earlier
e. Promp password: No
f. Password: password for the user on Windows
g. Authentication: Normal
h. Advanced Settings: Use Login Script Yes
i. Advanced Settings: Login Script

CHARMAP [windows-1252]
LOOP 10
{
SEND "CLIENT"+<0x0d>
WAIT 3
{
"SERVER" OK
}
}
EXIT KErrNoAnswer$
 
OK:
EXIT

be careful that you get it exactly as show here, including linebreaks. You could save it to a file, send to the phone and copy-paste to the settings.
j. Advanced Settings: Use PPP Compression Yes

4. run the program you installed at step1 (gnubox)
5. inside gnubox: Options-> 2box Direct -> Bluetooth, select your computer, leave gnubox running in background
6. run the nokia wml browser select "Bt" as access point and connect