Irshell 4.7 for 5.00M33-3

[webmastero]

Version 4.7 Release Note:
=========================
New Features:
- Support Dark_AleX latest 5.00M33-3 CFWs. Users of original 5.00M33 & M33-2 should upgrade to M33-3 to avoid incompatibility issues. The latest Popsloader 5.00 is also supported.
- An Infra-Red learning remote is added for PSP Phat. You no longer need to hunt pronto codes for your appliances. Just point your remote unit at the PSP and it will learn the iR code. It is available under higher firmwares and not fw 1.5 mode. Refer to the iR Learning Remote section for usage details.
- The nethostfs connection handling has been redesigned to be more robust. However, iR Shell 4.7 and onwards can only connect to the new nethostfs PC server v2.1. Make sure you've updated the nethostfs PC server. This version uses 4 consecutive TCP ports, default 7513-7516.
- Enhance UMD/ISO game compatibility via nethostfs MAX mode. Most previous failed games will probably work.
- Usbhostfs & nethostfs host redirection under XMB has returned. You can access your host PC media using XMB Photo, Music & Video players. You can't access host games from XMB, since this is already provided under iR Shell Application View. The free space under XMB will reflect your host free storage space. Due to limitations on XMB, it will only display upto 512GB in size.
- The Adhoc PC connection for nethostfs was broken since fw 3.71. This feature has been brought back for PSP Phat. Usage is the same as before. For PSP Phat only.
- Enhance the HTML Plugin (by Dark_AleX) to allow direct launching of flash games with extension SWF.

Infra-Red Learning Remote Usage:
--------------------------------
1. Switch to RDF view, then press "START" button to bring up a learning remote popup menu.
2. Choose "EDIT" to edit an existing remote or "CREATE" to create a new remote (a new rdf file). Either case, it will launch the remote app as a separate application.
3. If you choose "CREATE", you will be prompted to enter the rdf filename and then the title for the remote. The title will be the same as the filename by default. You can modify it with the OSK (On Screen Keyboard).
4. A "LEARNING MODE" screen will be displayed. You can press any key combo to start learning an iR remote signal. Point a remote to the PSP iR port and press the key on the remote control briefly. Don't hold it for too long. After the iR signal has been learnt, the OSK will popup to allow you to enter the key description. Repeat the whole process until all keys have been learnt. You'll have 30 seconds to complete each key combo learning cycle.
5. If you re-learn an existing key combo, the previous learned iR signal will be overwritten and no confirmation will be given. If the key combo has already been defined as a macro key (by editing rdf file manually), learning the same key combo will overwrite the macro key definition. That is, it will now become a non-macro key. Pls note macro key can only be defined by editing the rdf file manually.
6. You can toggle between "LEARNING MODE" and "PLAYBACK MODE" by pressing "START" button. While in "PLAYBACK MODE", you can test the newly learned iR codes.
7. You can also set the repeat/single-shot mode for each button you learn. You can toggle the setting via the learning remote menu or press "LTRIGGER + START". The current mode is displayed after "LEARNING MODE" keyword.
8. By default, the iR Carrier Frequency is set to 40kHz which all Sony devices use. About 80% appliances use 36kHz-40kHz carrier frequency, and the default setting of 40kHz will work on them. However, if the default doesn't work on your appliance, you can try to find the carrier frequency for your device and set it by pressing "Right Trigger + START". FYI, RCA & many dish network satelite remotes use 56kHz.
9. Upon completion, press "SELECT" button to save or cancel any changes.
Button Usage under LEARNING mode:
START: Toggle between learning & playback modes.
Right Trigger + START: Modify carrier frequency.
Left Trigger + START: Toggle Code Repeat or Single-Shot. Repeat code will cause the learned iR Code to repeat itself as long as the button is held. Single-Shot code will only be transmitted once.
SELECT: Learning Remote Menu
SQUARE: Toggle Code Repeat or Single-Shot.
SELECT: All codes in the current remote will be converted to Repeat codes.
START: All codes in the current remote will be converted to Single-Shot codes.

Here Is the New IRSHELL for the 5.00 M33-3 only.

[Only Registered users can see links . Click Here To Register...]

for the skin pack here is the link:
[Only Registered users can see links . Click Here To Register...]

[steaner]

thahk; it s useful

[reaver8000]

yea thnx alot been looking for this type of program for a long time and the learning remote thing is very nice to have to.

[jajo9000]

Work that on 5.00 m33-4 ?

[Spiral]

Originally Posted by jajo9000

Work that on 5.00 m33-4 ?

why not giving it a try .?
and post your feedback here

[1qwerty]

Originally Posted by Spiral

why not giving it a try .?
and post your feedback here

Yeah iRshell 4.7 works on my 5.00 m33-4 fatty.

BTW I just made this account to see download link hehe :P

[Denny025]

I dont have the remote to my tv anymore i use the remote that dish network provides its a dishdvr remote and has like 2 inrared things on it, and i cant get the psp to see when I press a button on the remote. I know the psp works cause it works fine with my camcorders remote control. Thank You.

[jay777]

i've downloaded the file..please can someone give step by step instructions on how to install it because when i do it...and go on it in the game saved part on my psp it says "the game could not be started. (80010002)". thanks

[jay777]

^^^^5.00 m33-3

[skyerr]

Thank a lot sir